INTENSIV® by BLANCHON is a two-component floor coating based on water-based polyurethane resins. Its technical performance and formulation meet the most stringent ecological criteria. It is also a beneficiary of the German GEV-EMICODE® EC1R label, which offers the most ecological approach to interior work. INTENSIV® is based on odourless carbon complex resins selected for their high resistance to abrasion and scratching, their remarkable flexibility and their rapid hardening. It can be applied to all commonly used wood species. Its light shade protects and enhances their grain and tone.
The components of INTENSIV® are particularly effective in high-traffic areas such as shops, offices, hotels, conference rooms, schools, corridors and entrances.
The humidity of the surface must not exceed 10%.
NB: Do not varnish a floor at a temperature below 12°C and a relative humidity of more than 85%. Do not apply to wood with a humidity of more than 10%. Use only in well ventilated areas.
Directly on the wood in 3 coats.
Dust free: 45 minutes in normal conditions.
Between coats: 4 hours under normal conditions.
Do not exceed 24 hours between coats.
Final hardness: 8 to 10 days
Light traffic: Approximately 24 hours in normal conditions.
During the first 10 days, take a few precautions: do not cover (protective tarpaulins), do not lay carpets on the varnished floor. Do not move heavy furniture. Remove dust with a hoover or broom. Place suitable protectors (felt) under the legs of tables and chairs. Do not allow water or other liquids to stand on your varnished floor.
Immediately after use, with water.
Do not reuse the packaging.
How to dispose : Wring out the material thoroughly after application; wipe it dry. Rinse with very little water in a container and allow the water to evaporate. The dry residue can then be disposed in the trash. Close the package tightly after use. Do not pour the residue down the drain. Dispose of the empty container at the waste disposal centre.
10 m2 / Litre (107.64 ft2 / Litre)
Dust regularly with a hoover or broom.
From time to time, wet sweep with a well wrung out material and never drip. Spot stains and marks can be easily removed with BLANCHON LAGOON®, BLANCHON LISABRIL CLEANER or a neutral detergent (at normal use concentration).
IMPORTANT: Wait 10 days for the first application so that INTENSIV® dries thoroughly.
PROHIBIT: Mops, silicone polishers, ammonia products or abrasive detergent. (All materials and products that may cause slipperiness and shine)
Floors varnished with INTENSIV® and subjected to heavy traffic must be maintained with the MATTE or SATIN RENOVATOR and the LISABRIL CLEANER. The frequency of this maintenance depends on the traffic of the premises.
On INTENSIV® Matt, use only the MATTE RENOVATOR, LAGOON® or LISABRIL CLEANER so as not to alter the initial appearance.
INTENSIV® (Comp. A): store away from frost (take care when storing in vehicles).
AQUA PRO HARDENER (Comp. B): not affected by frost.
Carefully seal the 2 components after use.
CAUTION: Do not apply below 12°C. Do not leave within the reach of children.