AUTHENTIC is a protective transparent coat dedicated for PRIM’AUTHENTIC or as a finishing coat on unfinished wood. AUTHENTIC is an impregnating colourless oil, not a varnish. Avoid leaving a film of oil on the surface.
The surfaces must be clean and free of dust, wax, grease, varnish etc.
If the surfaces have been treated with PRIM’AUTHENTIC , sanding is not necessary. Otherwise, use a sander and sand the surface with grit # 100 or # 120 sandpaper to facilitate a good penetration of the product.
Stir the AUTHENTIC container very well. Apply a small quantity of product, with a brush, a roller, a spatula, or a buffing machine, then wipe with a buffing machine (white pad).
If necessary after 4 hours, wipe the excess of product with a buffing machine fitted with a white pad. For small areas, use a clean cloth to wipe the AUTHENTIC.
Let the surface dry for 24 hrs.
For a colourless finishing without using PRIM’AUTHENTIC , apply 2 coats of AUTHENTIC 24 hours apart.
160-215 sq. ft. / L per coat
Shake AUTHENTIC container very well before use. It is important to remove all excess oil on overlaps and wood knots to prevent drying problems. Do not apply at temperatures below 15°C. Allow product to reach room temperature before application. In its original unopened container, stored in a cool and dry place, the product will keep for at least 12 months.
“https://evofinition.ca/en/product/authentic-oil-based-impregnating-colourless-finish-carver/”