Blanchon’s Environment Oil is a natural, hybrid and impregnating vegetal oil containing a water base. The environment oil keeps the natural look of the wood without yellowing it. Simple and practical, it applies directly to wood with a roller. A perfect finish, without wiping or polishing. The application is also possible with a gun, on furniture, worktops, woodwork and vertical surfaces. The Environment Oil is easy to maintain and refresh. It is odourless and easy to apply, making it possible to finish a floor in less than a day. A careful circulation is possible after 12 hours.
The wood must be clean and free from any trace of old finish. Sand the wood with sandpaper 100 or 120, to open the pores of the wood and facilitate absorption. Dust thoroughly. Shake the product well.
IMPORTANT: The slightly milky appearance of the ENVIRONMENT OIL disappears within a few seconds of drying.
Wait 1 hour between layers. Do not exceed 48 hours between layers.
A slight sanding of the surface with a 180 grit sandpaper, before the last layer, eliminates the small irregularity of the wood, thus obtaining a superb aspect and facilitating the maintenance.
Periodic maintenance: With GENERIO by LIGNA.
Sand energetically, with abrasive paper, to the deteriorated areas before making a local application (1 or 2 layers).
Lightly sand the entire surface, remove dust and apply a thin coat of natural or tinted oil with a roller.
150 sq. Ft./Litre per layer